|
HARDWARE SYSTEM
REQUIREMENTS |
Pentium 3 or
equivalent |
|
1 GHz or better
PCI Bus, Rev. 2.2, 33MHz, 32Bit/USB 2.0 |
|
OPERATING
SYSTEMS |
Windows 2000 /
XP Pro |
|
ANALOG JACK |
Audio Connector:
φ3.5mm headphone jack |
|
Output
impedance: 32Ohms |
|
Real-time
monitoring: up to 16 Channels combined |
|
Play Volume:
programmable |
|
AUDIO ENCODING |
16Bit PCM
128Kbps |
|
8Bit PCM 64Kbps |
|
A-Law: 64Kbps |
|
μ-Law: 64Kbps |
|
VOX: 32Kbps |
|
ADPCM: 32Kbps |
|
GSM: 13.6Kbps |
|
GC8: 8Kbps |
|
MP3: 8Kbps |
|
AUDIO SIGNAL |
Frequency
Response: 300 - 3400 Hz (+/- 3dB) |
|
S/N ratio: >38dB |
|
VOX:
Programmable |
|
AGC:
Programmable |
|
PHYSICAL
CHARACTERISTICS |
Form Factor:
Full-size PCI card |
|
TONE DETECTION |
DTMF digits: 0 -
9, *, #, A, B, C, D |
|
Dynamic range:
-38 dBm to 0 dBm |
|
Minimum tone
detection: 40 ms |
|
Fax Tone
Detection: 1100/2200Hz |
|
Calling Process
Tone Detection: Programmable*4 |
|
TAP INTERFACE |
Insertion loss:
<1dB |
|
Isolation:
500VDC |
|
AC Impedance:
600Ohms |
|
Max Length
between PBX s and digital telephone: 600m |
|
Max Guaranteed
tap length: 20m |
|
Tap locate:
anywhere on the line |
|
External
connector: RJ-45 *4 |
|
TECHNICAL
SPECIFICATIONS |
Max ports per
system: Up to 320 |
|
Resource Sharing
Bus: H.100 |
|
ENVIRONMENTAL
CONDITIONS |
Operating
Temperature: 0C to +55C |
|
Storage
Temperature: -20C to +85C |
|
Operating
humidity: 8% to 90% non-condensing |
|
Storage
humidity: 8% to 90% non-condensing |
|
POWER
REQUIREMENTS |
+5VDC: 1.4 A(16
port) |
|
+12VDC: 100mA |
|
-12VDC: 200mA |
|
PBX INTERFACE |
Support 2-wire
and 4-wire digital phone lines |
|
SAFETY AND
CERTIFICATIONS |
Lightning: Level
4 |
|
Certificates:
FCC & CE & AS/NZS CISPR |
|
HARDWARE SYSTEM
REQUIREMENTS |
Pentium 3 or
equivalent |
|
1 GHz or better
PCI Bus, Rev. 2.2, 33MHz, 32Bit |
|
OPERATING
SYSTEMS |
Windows 2000 /
XP Pro |
|
ENVIRONMENTAL
CONDITIONS |
Operating
Temperature: 0C to +55C |
|
Storage
Temperature: -20C to +85C |
|
Humidity: 8% to
90% non-condensing |
|
Storage
humidity: 8% to 90% non-condensing |
|
TECHNICAL
SPECIFICATIONS |
Max ports per
system: up to 480 ports |
|
Resource Sharing
Bus: H.100/H.110 |
|
PHYSICAL
CHARACTERISTICS |
Form Factor:
full-size PCI card |
|
ROBBED BIT T1 |
Signaling
Mechanism: AB bits and MF/DTMF digits reported per channel. |
|
Inbound and
outbound signaling bits and digits are reported separately. |
|
AUDIO SIGNAL |
Receive range:
-68 dBm to + 3 dBm |
|
Input gain
control: +20 to -20 dB |
|
Silence
Detection: programmable from API |
|
Automatic Gain
Control (AGC): programmable from API |
|
Activity
Detection: programmable from API |
|
Frequency
Response: 300 - 3400 Hz (+/- 3dB) |
|
POWER
REQUIREMENTS |
+5 VDC: 1.5A |
|
ISDN/SS7/SS1
PROTOCOLS |
ISDN PRI |
|
Q.SIG |
|
DSS1 |
|
SS7(14/24bit) |
|
MF R2 |
|
TAP INTERFACE |
Trunk type:
E1/T1/J1 |
|
Trunk Interface:
Digital High Impedance (Z) |
|
AC Impedance:
>=2400 Ohms |
|
Receive clock
rate: 1.544 MHz +/-200ppm (2.048 +/-175ppm) |
|
Input level:
3.2V down to 0.45V (LBO 0 dB to -22 dB) |
|
Maximum tap
length: 2m (75 Ohm BNC) or |
|
30m of CAT 3
cable |
|
Framing: SF
(D3/D4), ESF, CRC-4 |
|
Line Coding:
AMI, B8ZS, HDB3 |
|
Clock and data
recovery: complies with AT&T TR62411 and Bellcore TA-TSY-000170 |
|
Connectors: 4
BNC/RJ-48C connectors |
|
AUDIO ENCODING |
16Bit PCM
128Kbps |
|
8Bit PCM 64Kbps |
|
A-Law: 64Kbps |
|
μ-Law: 64Kbps |
|
VOX: 32Kbps |
|
ADPCM: 32Kbps |
|
GSM: 13.6Kbps |
|
MP3: 8Kbps |
|
DTMF CAS |
LINE SIDE |
|
ROBBED BIT T1 |
|
TONE DETECTION |
DTMF digits:. 0
- 9, *, #, A, B, C, D |
|
Dynamic range:
-38 dBm to 0 dBm |
|
Minimum tone
detection: 40ms |
|
Fax Tone
Detection: 1100/2200Hz |
|
Calling Process
Tone Detection: programmable*4 |
|
SAFETY AND
CERTIFICATIONS |
Lightning: Level
4 |
|
Certificates:
FCC & CE & AS/NZS CISPR |
|
HARDWARE SYSTEM
REQUIREMENTS |
Pentium 3 or
equivalent |
|
1 GHz or better
PCI Bus, Rev. 2.2, 33MHz, 32Bit/cPCI/USB 2.0 |
|
OPERATING
SYSTEMS |
Windows 2000/XPPro |
|
ENVIRONMENTAL
CONDITIONS |
Operating
Temperature: 0C to +55C |
|
Storage
Temperature: -20C to +85C |
|
Humidity: 8% to
90% non-condensing |
|
Storage
humidity: 8% to 90% non-condensing |
|
TONE DETECTION |
DTMF digits: 0 -
9, *, #, A, B, C, D |
|
Dynamic range:
-38 dBm to 0 dBm |
|
Minimum tone
detection: 40 ms |
|
Fax Tone
Detection: 1100/2200Hz |
|
Calling Process
Tone Detection: programmable*4 |
|
AUDIO ENCODING |
16Bit PCM
128Kbps |
|
8Bit PCM 64Kbps |
|
A-Law: 64Kbps |
|
μ-Law: 64Kbps |
|
VOX: 32Kbps |
|
ADPCM: 32Kbps |
|
GSM: 13.6Kbps |
|
MP3: 8Kbps |
|
TECHNICAL
SPECIFICATIONS |
Max board per
system: any combination up to 256 ports |
|
Max ports per
system: up to 512 Resource Sharing Bus: H.100/H.110 (except 8 port
PCI Board) |
|
PHYSICAL
CHARACTERISTICS |
Form Factor:
Half/Full-size PCI card |
|
6U cPCI |
|
POWER
REQUIREMENTS ( 8 Port |
+5 VDC: 600mA |
|
-12 VDC: 80mA |
|
+12 VDC: 300 mA |
|
Watts (Max):
7.6W |
|
(16 port) |
|
+5 VDC: 800mA |
|
-12 VDC: 120mA |
|
+12 VDC: 350 mA |
|
Watts (Max):
9.9W |
|
(4 port USB) |
|
+5 VDC: 300mA |
|
Watts (Max):
1.5W |
|
AUDIO SIGNAL |
Receive range:
-68 dBm to + 3 dBm |
|
Input gain
control: +20 to -20 dB |
|
Silence
Detection: programmable from API |
|
Automatic Gain
Control (AGC): programmable from API |
|
Activity
Detection: programmable from API |
|
Frequency
Response: 300 - 3400 Hz (+/- 3dB) |
|
Signal/Noise
ratio: >=42dB |
|
Idle channel
noise: <=60dB |
|
Crosstalk
coupling: <=-70 dB |
|
TAP INTERFACE |
Insertion loss:
<1dB |
|
Isolation:
500VDC |
|
AC Impedance:
10k Ohms |
|
DC Impedance: 2M
Ohms |
|
Ring detection:
30Vrms (min), 16 to 68Hz |
|
Ringer
Equivalence Number: < 0.2/Programmable |
|
Voltage
detection: -62V to +62V Step=0.5V |
|
Caller ID: FSK/DTMF |
|
ANALOG JACK |
Audio Connector:
φ3.5mm headphone jack |
|
Output
impedance: 32Ohms |
|
Play Volume:
programmable |
|
SAFETY AND
CERTIFICATIONS |
Lightning: Level
4 |
|
Certificates:
FCC & CE & AS/NZS CISPR |